Integrate Singlewire Software with Algo Communication Solution Products


Singlewire Software can be integrated with Algo Communications Solutions.

By combining InformaCast and the Legacy Paging Interface or LPI with the Algo 8180 SIP Auto Alerter you create an even more powerful mass notification system.

Integrating Singlewire's applications with Algo’s products has the following requirements

  • Cisco Unified Communications Manager (CUCM)
  • Cisco IP phone(s)
  • Algo 8180 SIP Audio Alerter(s)
  • Singlewire's InformaCast applications
  • Singlewire's Legacy Paging Interface (LPI) application

The Algo 8180 SIP Audio Alerter can register to CUCM as a third-party SIP device. The device itself is programmed with a directory number (DN) as its paging extension. When the device receives a call on this number, it outputs the audio of the call through the speaker, thus allowing paging functionality.

When more than one Algo 8180 SIP Audio Alerter is present, the device that receives the telephone call for paging can be set up to multicast the audio back onto the network, and all other Algo devices can be programmed to listen to that multicast audio.

InformaCast, integrated with the CUCM, provides functionality to page, or “broadcast,” through Cisco’s IP phones. When integrated with Singlewire’s LPI, InformaCast can also place phone calls to other systems. The LPI registers to InformaCast as an IP speaker. When the LPI-registered IP speaker is added to an InformaCast recipient group (i.e. a paging zone), InformaCast can send a broadcast (i.e. page), and the LPI dials a telephone number and plays audio.

Singlewire has a whitepaper available to help users integrate Singlewire software into an environment using Algo Communications Solutions products.




InformaCast Online Demo