DEMO VIDEO

Receiving Alerts

Multichannel alert delivery demo: one message, every device and channel

Most organizations reach people through a patchwork of tools, which makes it hard to know whether an alert reaches everyone or just whoever is near the right device. This demo shows how InformaCast sends one message to the devices in your buildings, the phones in people’s pockets, and the collaboration tools they already use. See how device groups, distribution lists, templates, and notification profiles work together, and how one activation can also tell connected systems to act, like locking doors.

In this demo, you’ll see how to:

  • Reach speakers, screens, desk phones, and desktops
  • Send texts, emails, push notifications, and calls
  • Tailor messages for different groups and areas
  • Signal connected systems like door locks and strobes

Introduction

When an emergency unfolds, every person needs to know as quickly as possible — whatever room they’re in, whatever’s on their desk, whether or not they’re looking at their phone.

While most organizations have tools in place to deliver critical messages, they’re usually a patchwork: some newer, some older, some barely thought about until they’re needed. That makes it easy to wonder whether a message will really reach everyone, or just whoever happens to be near the right device.

But what if every one of those devices could carry the same message, at the same time?

Singlewire InformaCast reaches people in three places: the devices in your buildings, the phones in their pockets, and the collaboration tools they already work in.

That means complete in-building coverage with speakers, digital signage, phones, and desktop computers. It means delivering those same in-building messages directly to people on their cell phones as text, email, push notifications, or phone calls. And in collaboration tools, it means messages appear in the places employees are working every day.

One activation can carry text, audio, and visuals, to every device, all at once.

For IT directors, that means one system that connects to what you already have, with room to grow over time. For safety directors, it means confidence that people get the message no matter which device happens to be nearby. And for everyone else, it means receiving an intrusive message with clear instructions so they can act immediately, whether it’s an emergency or an everyday update.

How it works

So how do you get one message out across all of these devices at once? It comes down to three things: who and what you’re reaching, what the message says, and how it behaves once it’s sent.

You start by grouping who and what needs to be reached. Device groups pull together your devices, and distribution lists pull together your people.

Those groups tie into a message template or a scenario, which is where you decide what the notification says and who’s included.

From there, a notification profile decides how the message behaves: which channels it goes out on, how it looks on a desktop screen, and details like priority and repetition.

The template is what you’re sending and to whom, and the profile is how it behaves and looks when it’s delivered.

You can even send unique messages to different groups of people or areas of your building at the same time for the same event, and select whether you want text, audio, visuals, or all three to be included in your message. This can all be preset ahead of time, or you can select in the moment depending on the situation.

And because InformaCast connects to other devices on your network, that same activation can also tell a connected system to act — light up a strobe, lock a door, or shut down certain equipment — depending on what that system supports.

Let me show you how this works during a real event. Imagine there’s a threat to the people in your building and you need to initiate a lockdown. One simple activation from InformaCast reaches all your devices and people at once.

Desk phones and IP speakers sound the alert, digital signage and desktops have notifications appear on every screen, and mobile phones receive a text message with the same information that’s being broadcast through your building. At the same time, that activation locks the doors connected to your access control system.

One message, sent once, reaching every device and person inside your building and out, instantly. People know what’s happening and what to do so they can stay out of harm’s way and begin delivering help to those that need it.

What’s next

Whether it’s an everyday announcement or a critical alert, InformaCast ensures your people get the information they need, no matter where they are.

If you missed it, be sure to watch our video on activating alerts, to learn how to start the notification process. You can also see how InformaCast offers the ability to target alerts, and take a deeper dive into how we connect with your existing technology.

When we talk next, we’ll discuss the devices and methods you already have in place to reach people, and how InformaCast can help ensure no one misses a message when it matters most.